1-805-484-2992
Quotes - Engineering - SalesF80x30
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n F80x30 as shown on this page.
Description
The F80x30 is a 30-plate build of the SWEP F80. The F80 plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 7.0 kg (15.5 lb) dry. The frame is published to 16.9 m3/h (74.41 GPM) - a port limit rather than a design flow. If the duty has changed since the original equiptment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plates:
30
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
7.0 kg (15.5 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
