1-805-484-2992
Quotes - Engineering - SalesV80Hx90/1P-SC-S 22U+35.1+2x1 1/4"&28U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 90 | 74.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n V80Hx90/1P-SC-S 22U+35.1+2x1 1/4"&28U as shown on this page.
Description
The V80Hx90/1P-SC-S 22U+35.1+2x1 1/4"&28U is a 90-plate build of the SWEP V80. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing S is the pressure class: 31 bar at 155 C. Connections are listed as 22U+35.1+2x1 1/4"&28U, in port order. The V80 plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 90-plate unit comes to about 20.1 kg (44.2 lb) dry. Maximum flow for the frame is 16.9 m3/h (74.41 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
90
Pass Arrangement:
Single pass (1P)
Connections:
22U+35.1+2x1 1/4"&28U
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
20.1 kg (44.2 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 16.9 m3/h (74.41 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
