1-805-484-2992
Quotes - Engineering - SalesB320HTHx90/1P-SC-S 4x2 1/2"
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 90 | 271.66 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B320HTHx90/1P-SC-S 4x2 1/2" as shown on this page.
Description
B320HTHx90/1P-SC-S 4x2 1/2" designates a SWEP B320HT brazed plate heat exchanger with 90 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. It is catalogued with 4x2 1/2" connections. The B320HT plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 441 x 159 mm port centres, and by SWEP's published weight formula a 90-plate unit comes to about 48.3 kg (106.6 lb) dry. Maximum flow for the frame is 61.7 m3/h (271.66 GPM); that is a ceiling for the ports, not a duty point. For a new duty, send the inlet temperature on each side and the flows, and we will say immediatly whether this plate count is the right one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
90
Pass Arrangement:
Single pass (1P)
Connections:
4x2 1/2"
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
441 x 159 mm (17.36 x 6.26 in)
Dry Weight (calculated):
48.3 kg (106.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 61.7 m3/h (271.66 GPM)
- Max Plates on Frame: 300
- Approvals: PED, UL, KHK
