1-805-484-2992
Quotes - Engineering - SalesB400THx130/1P-SC-M
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 130 | 365.44 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B400THx130/1P-SC-M as shown on this page.
Description
The B400THx130/1P-SC-M is a 130-plate build of the SWEP B400T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The B400T plate pack measures 694 x 304 mm (27.32 x 11.97 in) on 601 x 205.5 mm port centres, and by SWEP's published weight formula a 130-plate unit comes to about 99.0 kg (218.2 lb) dry. Maximum flow for the frame is 83 m3/h (365.44 GPM); that is a ceiling for the ports, not a duty point. Treat each side as an independant circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
130
Pass Arrangement:
Single pass (1P)
Plate Pack (A x B):
694 x 304 mm (27.32 x 11.97 in)
Port Centres (C x D):
601 x 205.5 mm (23.66 x 8.09 in)
Dry Weight (calculated):
99.0 kg (218.2 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 83 m3/h (365.44 GPM)
- Max Plates on Frame: 280
- Approvals: PED, UL, KHK
