1-805-484-2992
Quotes - Engineering - SalesDP400x180
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 180 | 334.62 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DP400x180 as shown on this page.
Description
The DP400x180 is a 180-plate build of the SWEP DP400. The DP400 plate pack measures 694 x 304 mm (27.32 x 11.97 in) on 604 x 216 mm port centres, and by SWEP's published weight formula a 180-plate unit comes to about 128.6 kg (283.5 lb) dry. The frame is published to 76 m3/h (334.62 GPM) - a port limit rather than a design flow. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plates:
180
Plate Pack (A x B):
694 x 304 mm (27.32 x 11.97 in)
Port Centres (C x D):
604 x 216 mm (23.78 x 8.50 in)
Dry Weight (calculated):
128.6 kg (283.5 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 76 m3/h (334.62 GPM)
- Max Plates on Frame: 282
