1-805-484-2992
Quotes - Engineering - SalesB120THx40
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 40 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B120THx40 as shown on this page.
Description
This is the 40-plate B120T: SWEP designation B120THx40. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The B120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 40-plate unit comes to about 24.5 kg (54.0 lb) dry. The frame is published to 27.4 m3/h (120.64 GPM) - a port limit rather than a design flow. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm wether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
40
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
24.5 kg (54.0 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
