1-805-484-2992
Quotes - Engineering - SalesB220Lx120/1P-SC-S 4x2"
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 120 | 171.71 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B220Lx120/1P-SC-S 4x2" as shown on this page.
Description
B220Lx120/1P-SC-S 4x2" designates a SWEP B220 brazed plate heat exchanger with 120 plates in the pack. Its L plates are the low-theta pattern: less pressure drop per plate, and correspondingly more plates for the same duty. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. Connections are listed as 4x2", in port order. The B220 plate pack measures 524 x 202 mm (20.63 x 7.95 in) on 442 x 120 mm port centres, and by SWEP's published weight formula a 120-plate unit comes to about 48.8 kg (107.6 lb) dry. Maximum flow for the frame is 39 m3/h (171.71 GPM); that is a ceiling for the ports, not a duty point. If any field on your nameplate differs from the string above, tell us which one; a single letter is relevent to both rating and fit.
Product Overview
Configuration & Size
Plate Type:
L - acute chevron, low pressure drop
Plates:
120
Pass Arrangement:
Single pass (1P)
Connections:
4x2"
Plate Pack (A x B):
524 x 202 mm (20.63 x 7.95 in)
Port Centres (C x D):
442 x 120 mm (17.4 x 4.72 in)
Dry Weight (calculated):
48.8 kg (107.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 39 m3/h (171.71 GPM)
- Max Plates on Frame: 296
- Approvals: PED, UL, KHK
