1-805-484-2992
Quotes - Engineering - SalesDB200x80
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 80 | 118.88 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DB200x80 as shown on this page.
Description
The DB200x80 is a 80-plate build of the SWEP DB200. The DB200 plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 80-plate unit comes to about 41.3 kg (91.1 lb) dry. Maximum flow for the frame is 27 m3/h (118.88 GPM); that is a ceiling for the ports, not a duty point. Treat each side as an independent circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Configuration & Size
Plates:
80
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
41.3 kg (91.1 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27 m3/h (118.88 GPM)
- Max Plates on Frame: 202
