1-805-484-2992
Quotes - Engineering - SalesDP200x120
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 120 | 118.88 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DP200x120 as shown on this page.
Description
The DP200x120 is a 120-plate build of the SWEP DP200. The DP200 plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 120-plate unit comes to about 59.7 kg (131.6 lb) dry. The frame is published to 27 m3/h (118.88 GPM) - a port limit rather than a design flow. If the flow on either side would excede the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plates:
120
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
59.7 kg (131.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27 m3/h (118.88 GPM)
- Max Plates on Frame: 202
