1-805-484-2992
Quotes - Engineering - SalesDP200x150
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 150 | 118.88 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DP200x150 as shown on this page.
Description
The DP200x150 is a 150-plate build of the SWEP DP200. The DP200 plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 150-plate unit comes to about 72.3 kg (159.4 lb) dry. The frame is published to 27 m3/h (118.88 GPM) - a port limit rather than a design flow. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm wether this configuration still fits.
Product Overview
Configuration & Size
Plates:
150
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
72.3 kg (159.4 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27 m3/h (118.88 GPM)
- Max Plates on Frame: 202
