1-805-484-2992
Quotes - Engineering - SalesDP200x90
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 90 | 118.88 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DP200x90 as shown on this page.
Description
DP200x90 designates a SWEP DP200 brazed plate heat exchanger with 90 plates in the pack. The DP200 plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 90-plate unit comes to about 47.1 kg (103.9 lb) dry. The frame is published to 27 m3/h (118.88 GPM) - a port limit rather than a design flow. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.
Product Overview
Configuration & Size
Plates:
90
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
47.1 kg (103.9 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27 m3/h (118.88 GPM)
- Max Plates on Frame: 202
