1-805-484-2992
Quotes - Engineering - SalesF120Tx220
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 220 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n F120Tx220 as shown on this page.
Description
This is the 220-plate F120T: SWEP designation F120Tx220. The F120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 220-plate unit comes to about 102.6 kg (226.3 lb) dry. The frame is published to 27.4 m3/h (120.64 GPM) - a port limit rather than a design flow. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plates:
220
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
102.6 kg (226.3 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
