1-805-484-2992
Quotes - Engineering - SalesF120Tx90
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 90 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n F120Tx90 as shown on this page.
Description
The F120Tx90 is a 90-plate build of the SWEP F120T. The F120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 90-plate unit comes to about 47.5 kg (104.8 lb) dry. Maximum flow for the frame is 27.4 m3/h (120.64 GPM); that is a ceiling for the ports, not a duty point. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plates:
90
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
47.5 kg (104.8 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
