1-805-484-2992
Quotes - Engineering - SalesF200Tx120
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 120 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n F200Tx120 as shown on this page.
Description
F200Tx120 designates a SWEP F200T brazed plate heat exchanger with 120 plates in the pack. The F200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 120-plate unit comes to about 59.8 kg (131.9 lb) dry. The frame is published to 43.7 m3/h (192.41 GPM) - a port limit rather than a design flow. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plates:
120
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
59.8 kg (131.9 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
