1-805-484-2992
Quotes - Engineering - SalesF200Tx140
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 140 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n F200Tx140 as shown on this page.
Description
The F200Tx140 is a 140-plate build of the SWEP F200T. The F200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 140-plate unit comes to about 68.2 kg (150.5 lb) dry. Maximum flow for the frame is 43.7 m3/h (192.41 GPM); that is a ceiling for the ports, not a duty point. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plates:
140
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
68.2 kg (150.5 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
