1-805-484-2992
Quotes - Engineering - SalesP200Tx110
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 110 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P200Tx110 as shown on this page.
Description
P200Tx110 designates a SWEP P200T brazed plate heat exchanger with 110 plates in the pack. The P200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 110-plate unit comes to about 59.0 kg (130.0 lb) dry. Maximum flow for the frame is 43.7 m3/h (192.41 GPM); that is a ceiling for the ports, not a duty point. Where a nameplate is worn, the plate count and the connection sizes are usually enough to separate this build from its neighbours in the series.
Product Overview
Configuration & Size
Plates:
110
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
59.0 kg (130.0 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
