1-805-484-2992
Quotes - Engineering - SalesP200Tx130
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 130 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P200Tx130 as shown on this page.
Description
P200Tx130 designates a SWEP P200T brazed plate heat exchanger with 130 plates in the pack. The P200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 130-plate unit comes to about 68.0 kg (149.8 lb) dry. The frame is published to 43.7 m3/h (192.41 GPM) - a port limit rather than a design flow. Thermal performence depends on the duty as much as on the part number, so include the fluids if the unit is going into a new application.
Product Overview
Configuration & Size
Plates:
130
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
68.0 kg (149.8 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
