1-805-484-2992
Quotes - Engineering - SalesP200Tx170
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 170 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P200Tx170 as shown on this page.
Description
Part number P200Tx170 is the SWEP P200T frame carrying 170 plates. The P200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 170-plate unit comes to about 86.0 kg (189.5 lb) dry. The frame is published to 43.7 m3/h (192.41 GPM) - a port limit rather than a design flow. Check the connection field separately from the plate count: two units can be consistent in every other field and still not pipe up.
Product Overview
Configuration & Size
Plates:
170
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
86.0 kg (189.5 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
