1-805-484-2992
Quotes - Engineering - SalesV200THx40/1P-SC-M 28U+54.3&60+2x2"
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 40 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n V200THx40/1P-SC-M 28U+54.3&60+2x2" as shown on this page.
Description
V200THx40/1P-SC-M 28U+54.3&60+2x2" designates a SWEP V200T brazed plate heat exchanger with 40 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The connection field reads 28U+54.3&60+2x2". The V200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 40-plate unit comes to about 27.4 kg (60.5 lb) dry. Maximum flow for the frame is 43.7 m3/h (192.41 GPM); that is a ceiling for the ports, not a duty point. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
40
Pass Arrangement:
Single pass (1P)
Connections:
28U+54.3&60+2x2"
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
27.4 kg (60.5 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
