1-805-484-2992
Quotes - Engineering - SalesDB650x110
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 110 | 616.40 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n DB650x110 as shown on this page.
Description
The DB650x110 is a 110-plate build of the SWEP DB650. The DB650 plate pack measures 744.6 x 365.6 mm (29.31 x 14.39 in), and by SWEP's published weight formula a 110-plate unit comes to about 117.9 kg (259.9 lb) dry. The frame is published to 140 m3/h (616.40 GPM) - a port limit rather than a design flow. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plates:
110
Plate Pack (A x B):
744.6 x 365.6 mm (29.31 x 14.39 in)
Dry Weight (calculated):
117.9 kg (259.9 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
Rating
- Max Flow: 140 m3/h (616.40 GPM)
- Max Plates on Frame: 346
