1-805-484-2992
Quotes - Engineering - SalesB15THx20/1P-SC-M 2x22U+2x3/4"&16
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 20 | 17.61 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B15THx20/1P-SC-M 2x22U+2x3/4"&16 as shown on this page.
Description
The B15THx20/1P-SC-M 2x22U+2x3/4"&16 is a 20-plate build of the SWEP B15T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. It is catalogued with 2x22U+2x3/4"&16 connections. The B15T plate pack measures 468 x 76 mm (18.43 x 2.99 in) on 432 x 40 mm port centres, and by SWEP's published weight formula a 20-plate unit comes to about 3.3 kg (7.3 lb) dry. The frame is published to 4 m3/h (17.61 GPM) - a port limit rather than a design flow. Treat each side as an independent circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
20
Pass Arrangement:
Single pass (1P)
Connections:
2x22U+2x3/4"&16
Plate Pack (A x B):
468 x 76 mm (18.43 x 2.99 in)
Port Centres (C x D):
432 x 40 mm (17.01 x 1.57 in)
Dry Weight (calculated):
3.3 kg (7.3 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 4 m3/h (17.61 GPM)
- Max Plates on Frame: 60
- Approvals: PED, UL, KHK
