1-805-484-2992
Quotes - Engineering - SalesB8THx10/1P-SC-M 4x3/4''&16
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 10 | 17.61 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B8THx10/1P-SC-M 4x3/4''&16 as shown on this page.
Description
Part number B8THx10/1P-SC-M 4x3/4''&16 is the SWEP B8T frame carrying 10 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 4x3/4''&16, in port order. The B8T plate pack measures 317 x 76 mm (12.48 x 2.99 in) on 278 x 40 mm port centres, and by SWEP's published weight formula a 10-plate unit comes to about 1.6 kg (3.5 lb) dry. Maximum flow for the frame is 4 m3/h (17.61 GPM); that is a ceiling for the ports, not a duty point. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Part Number:
B8THx10/1P-SC-M 4x3/4''&16
Series:
SWEP B8T
Brand:
SWEP
SWEP Article Number:
B8THx101PSCM 4x3416
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
10
Pass Arrangement:
Single pass (1P)
Connections:
4x3/4''&16
Plate Pack (A x B):
317 x 76 mm (12.48 x 2.99 in)
Port Centres (C x D):
278 x 40 mm (10.94 x 1.57 in)
Dry Weight (calculated):
1.6 kg (3.5 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 4 m3/h (17.61 GPM)
- Max Plates on Frame: 61
- Approvals: PED, UL, KHK
