1-805-484-2992
Quotes - Engineering - SalesE5THx16/1P-SC-S 4x-(0)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 16 | 17.61 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n E5THx16/1P-SC-S 4x-(0) as shown on this page.
Description
E5THx16/1P-SC-S 4x-(0) designates a SWEP E5T brazed plate heat exchanger with 16 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing S is the pressure class: 31 bar at 155 C. It is catalogued with 4x-(0) connections. The E5T plate pack measures 192 x 73 mm (7.56 x 2.87 in) on 154 x 40 mm port centres, and by SWEP's published weight formula a 16-plate unit comes to about 0.9 kg (2.1 lb) dry. The frame is published to 4 m3/h (17.61 GPM) - a port limit rather than a design flow. If the flow on either side would excede the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
16
Pass Arrangement:
Single pass (1P)
Connections:
4x-(0)
Plate Pack (A x B):
192 x 73 mm (7.56 x 2.87 in)
Port Centres (C x D):
154 x 40 mm (6.06 x 1.57 in)
Dry Weight (calculated):
0.9 kg (2.1 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 4 m3/h (17.61 GPM)
- Max Plates on Frame: 41
- Approvals: PED, UL, KHK
