1-805-484-2992
Quotes - Engineering - SalesB80SHx100/1P-SPS-M 4x1 1/4"&28U(27)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 100 | 74.85 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B80SHx100/1P-SPS-M 4x1 1/4"&28U(27) as shown on this page.
Description
The B80SHx100/1P-SPS-M 4x1 1/4"&28U(27) is a 100-plate build of the SWEP B80S. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SPS fields read as single pass, with 316 stainless steel plates and a stainless, copper free braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 4x1 1/4"&28U(27), in port order. The B80S plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 100-plate unit comes to about 25.3 kg (55.7 lb) dry. The frame is published to 17 m3/h (74.85 GPM) - a port limit rather than a design flow. Thermal performance depends on the duty as much as on the part number, so include the fluids if the unit is going into a new application.
Product Overview
Part Number:
B80SHx100/1P-SPS-M 4x1 1/4"&28U(27)
Series:
SWEP B80S
Brand:
SWEP
SWEP Article Number:
16640-100
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
100
Pass Arrangement:
Single pass (1P)
Connections:
4x1 1/4"&28U(27)
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
25.3 kg (55.7 lb)
Materials of Construction
- Plates: 316 stainless steel
- Braze: Stainless, copper free
- Material Code: SPS
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 17 m3/h (74.85 GPM)
- Max Plates on Frame: 137
- Approvals: PED, UL, KHK
