1-805-484-2992
Quotes - Engineering - SalesB80SHx100/1P-SPS-M 4x1 1/4"&28U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 100 | 74.85 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B80SHx100/1P-SPS-M 4x1 1/4"&28U as shown on this page.
Description
This is the 100-plate B80S: SWEP designation B80SHx100/1P-SPS-M 4x1 1/4"&28U. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SPS fields read as single pass, with 316 stainless steel plates and a stainless, copper free braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The connection field reads 4x1 1/4"&28U. The B80S plate pack measures 526 x 119 mm (20.71 x 4.69 in) on 470 x 63 mm port centres, and by SWEP's published weight formula a 100-plate unit comes to about 25.3 kg (55.7 lb) dry. Maximum flow for the frame is 17 m3/h (74.85 GPM); that is a ceiling for the ports, not a duty point. If the flow on either side would excede the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
100
Pass Arrangement:
Single pass (1P)
Connections:
4x1 1/4"&28U
Plate Pack (A x B):
526 x 119 mm (20.71 x 4.69 in)
Port Centres (C x D):
470 x 63 mm (18.5 x 2.48 in)
Dry Weight (calculated):
25.3 kg (55.7 lb)
Materials of Construction
- Plates: 316 stainless steel
- Braze: Stainless, copper free
- Material Code: SPS
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 17 m3/h (74.85 GPM)
- Max Plates on Frame: 137
- Approvals: PED, UL, KHK
