1-805-484-2992
Quotes - Engineering - SalesV25THx30/1P-SC-M 12.8+22U+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n V25THx30/1P-SC-M 12.8+22U+2x1"&22U as shown on this page.
Description
The V25THx30/1P-SC-M 12.8+22U+2x1"&22U is a 30-plate build of the SWEP V25. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 12.8+22U+2x1"&22U, in port order. The V25 plate pack measures 524 x 116 mm (20.63 x 4.57 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 10.9 kg (24.0 lb) dry. Maximum flow for the frame is 9 m3/h (39.63 GPM); that is a ceiling for the ports, not a duty point. Treat each side as an independent circuit when you ask for a quote: give both flows and what each fluid is.
Product Overview
Part Number:
V25THx30/1P-SC-M 12.8+22U+2x1"&22U
Series:
SWEP V25
Brand:
SWEP
SWEP Article Number:
V25THx301PSCM 12822U2x122U
Configuration & Size
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
12.8+22U+2x1"&22U
Plate Pack (A x B):
524 x 116 mm (20.63 x 4.57 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
10.9 kg (24.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
