1-805-484-2992
Quotes - Engineering - SalesV25THx40/1P-SC-M 12.8+22U+2x1"&22U
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 40 | 39.63 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n V25THx40/1P-SC-M 12.8+22U+2x1"&22U as shown on this page.
Description
Part number V25THx40/1P-SC-M 12.8+22U+2x1"&22U is the SWEP V25 frame carrying 40 plates. Reading the string: /1P is single pass; -SC is 316/316L stainless steel plates joined with copper. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. Connections are listed as 12.8+22U+2x1"&22U, in port order. The V25 plate pack measures 524 x 116 mm (20.63 x 4.57 in) on 479 x 72 mm port centres, and by SWEP's published weight formula a 40-plate unit comes to about 13.4 kg (29.6 lb) dry. The frame is published to 9 m3/h (39.63 GPM) - a port limit rather than a design flow. If the flow on either side would exceed the published ceiling, the answer is a larger frame, not more plates on this one.
Product Overview
Part Number:
V25THx40/1P-SC-M 12.8+22U+2x1"&22U
Series:
SWEP V25
Brand:
SWEP
SWEP Article Number:
V25THx401PSCM 12822U2x122U
Configuration & Size
Plates:
40
Pass Arrangement:
Single pass (1P)
Connections:
12.8+22U+2x1"&22U
Plate Pack (A x B):
524 x 116 mm (20.63 x 4.57 in)
Port Centres (C x D):
479 x 72 mm (18.86 x 2.83 in)
Dry Weight (calculated):
13.4 kg (29.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 9 m3/h (39.63 GPM)
- Max Plates on Frame: 140
- Approvals: PED, UL, KHK
