1-805-484-2992
Quotes - Engineering - SalesB400THx170/1P-SC-M
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 170 | 365.44 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n B400THx170/1P-SC-M as shown on this page.
Description
The B400THx170/1P-SC-M is a 170-plate build of the SWEP B400T. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The B400T plate pack measures 694 x 304 mm (27.32 x 11.97 in) on 601 x 205.5 mm port centres, and by SWEP's published weight formula a 170-plate unit comes to about 124.5 kg (274.6 lb) dry. The frame is published to 83 m3/h (365.44 GPM) - a port limit rather than a design flow. Thermal performance depends on the duty as much as on the part number, so include the fluids if the unit is going into a new application.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
170
Pass Arrangement:
Single pass (1P)
Plate Pack (A x B):
694 x 304 mm (27.32 x 11.97 in)
Port Centres (C x D):
601 x 205.5 mm (23.66 x 8.09 in)
Dry Weight (calculated):
124.5 kg (274.6 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 83 m3/h (365.44 GPM)
- Max Plates on Frame: 280
- Approvals: PED, UL, KHK
