1-805-484-2992
Quotes - Engineering - SalesP200Tx210
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 210 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P200Tx210 as shown on this page.
Description
P200Tx210 designates a SWEP P200T brazed plate heat exchanger with 210 plates in the pack. The P200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 210-plate unit comes to about 104.0 kg (229.2 lb) dry. Maximum flow for the frame is 43.7 m3/h (192.41 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plates:
210
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
104.0 kg (229.2 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
