1-805-484-2992
Quotes - Engineering - SalesP200Tx220
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 220 | 192.41 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n P200Tx220 as shown on this page.
Description
The P200Tx220 is a 220-plate build of the SWEP P200T. The P200T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 448.5 x 163.5 mm port centres, and by SWEP's published weight formula a 220-plate unit comes to about 108.5 kg (239.1 lb) dry. Maximum flow for the frame is 43.7 m3/h (192.41 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equiptment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plates:
220
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
448.5 x 163.5 mm (17.66 x 6.44 in)
Dry Weight (calculated):
108.5 kg (239.1 lb)
Materials of Construction
- Plates: 304 stainless steel
- Braze: Copper
Rating
- Max Flow: 43.7 m3/h (192.41 GPM)
- Max Plates on Frame: 250
