1-805-484-2992
Quotes - Engineering - SalesV120THx40/1P-SC-M 22U+42U+2x1 1/2"&35.1
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 40 | 120.64 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n V120THx40/1P-SC-M 22U+42U+2x1 1/2"&35.1 as shown on this page.
Description
V120THx40/1P-SC-M 22U+42U+2x1 1/2"&35.1 designates a SWEP V120T brazed plate heat exchanger with 40 plates in the pack. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing M is the pressure class: up to 45 bar at 135 C, fatigue tested. The connection field reads 22U+42U+2x1 1/2"&35.1. The V120T plate pack measures 525 x 243 mm (20.67 x 9.57 in) on 456 x 174 mm port centres, and by SWEP's published weight formula a 40-plate unit comes to about 25.3 kg (55.8 lb) dry. Maximum flow for the frame is 27.4 m3/h (120.64 GPM); that is a ceiling for the ports, not a duty point. For a new duty, send the inlet temperature on each side and the flows, and we will say immediately whether this plate count is the right one.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
40
Pass Arrangement:
Single pass (1P)
Connections:
22U+42U+2x1 1/2"&35.1
Plate Pack (A x B):
525 x 243 mm (20.67 x 9.57 in)
Port Centres (C x D):
456 x 174 mm (17.95 x 6.85 in)
Dry Weight (calculated):
25.3 kg (55.8 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: M - up to 45 bar at 135 C, fatigue tested
- Max Flow: 27.4 m3/h (120.64 GPM)
- Max Plates on Frame: 250
- Approvals: PED, UL, KHK
