1-805-484-2992
Quotes - Engineering - SalesE8THx30/1P-SC-S 4x3/4"(12)
SWEP| Product | Type | Plates | Max Flow |
|---|---|---|---|
| Heat Exchanger | Brazed Plate | 30 | 17.61 GPM |
Note: Unit pictured is representative of standard unit and may not exactly depict p/n E8THx30/1P-SC-S 4x3/4"(12) as shown on this page.
Description
Part number E8THx30/1P-SC-S 4x3/4"(12) is the SWEP E8T frame carrying 30 plates. Its H plates are the high-theta pattern - the choice when the leaving temperature is tight and the pump has head to spare. The /1P-SC fields read as single pass, with 316/316L stainless steel plates and a copper braze. The closing S is the pressure class: 31 bar at 155 C. Connections are listed as 4x3/4"(12), in port order. The E8T plate pack measures 315 x 73 mm (12.4 x 2.87 in) on 278 x 40 mm port centres, and by SWEP's published weight formula a 30-plate unit comes to about 2.7 kg (6.0 lb) dry. Maximum flow for the frame is 4 m3/h (17.61 GPM); that is a ceiling for the ports, not a duty point. If the duty has changed since the original equipment went in, send the flows and both inlet conditions and we will confirm whether this configuration still fits.
Product Overview
Configuration & Size
Plate Type:
H - obtuse chevron, high transfer
Plates:
30
Pass Arrangement:
Single pass (1P)
Connections:
4x3/4"(12)
Plate Pack (A x B):
315 x 73 mm (12.4 x 2.87 in)
Port Centres (C x D):
278 x 40 mm (10.94 x 1.57 in)
Dry Weight (calculated):
2.7 kg (6.0 lb)
Materials of Construction
- Plates: 316/316L stainless steel
- Braze: Copper
- Material Code: SC
Rating
- Pressure Class: S - 31 bar at 155 C
- Max Flow: 4 m3/h (17.61 GPM)
- Max Plates on Frame: 40
- Approvals: PED, UL, KHK
